search

HANGZHOU HENGBAI GEAR REDUCER CO.,LTD.

Tel:+86-571-82989000

Mobile:+86-13606647911
Fax:+86-571-82183777

E-mail:info@hangzhoureducer.com
     

Address: Jinquan Village, Yipeng Town, Xiaoshan District, Hangzhou
Zip Code: 311225

HENGBAI GEAR REDUCER

Because of concentration, so professional; because of the heart, so rest assured

Copyright ©2018 Hangzhou Hengbai Gear Reducer Co., Ltd. Powered by www.300.cn  浙ICP备05055419号

Online customer service
Customer service hotline
+86-571-82989000
QQ:
Service time:
9:00 - 17:30

Gear motor noise processing method

Release time:
2018/12/04 14:15
Page view
[Abstract]:
When there is a problem with the gear motor, we should check it in time to solve the problem, as long as we have some understanding of the problems that may occur with the gear motor.
       When there is a problem with the gear motor, we should check it in time to solve the problem, as long as we have some understanding of the problems that may occur with the gear motor.
 
       1. Damage to the transmission components During the installation process, the transmission components are damaged due to improper operation, resulting in inaccurate motion or unstable motion. Due to damage, high-speed moving parts are damaged by the oil film; moving parts are artificially unbalanced; both generate vibration and noise. This must be taken care of and avoided during the installation process. Damaged parts that cannot be repaired must be replaced to ensure a stable noise level.
 
       2. Damping and blocking measures When installing the gear unit, the resonance between the fuselage and the base bracket and the connecting piece should be avoided as much as possible. Noise is generated. The gear reducer motor usually has one or more gears inside the gear motor. Resonance occurs in these speed ranges. In addition to design reasons, there is a direct relationship between the installation and the resonant position without a null test, and corresponding damping or blocking measures. Some reducers that require low transmission noise and vibration. High toughness, high damping substrates should be used to reduce noise and vibration.
 
       3. The geared motor parts of the energy-saving geared motor are loose. Due to loose parts (such as bearing pre-tightening mechanism, shafting positioning mechanism, etc.), the system is not positioned correctly, the abnormal position is meshed, the shaft system moves, the vibration and noise are generated. It is necessary to proceed from the design structure, try to ensure the stability of the connection of various mechanisms, and adopt a variety of connection methods.
 
       The geometric accuracy of the components is adjusted because the geometric accuracy of the installation does not meet the requirements of the standard, resulting in resonance and noise generation of the gear motor components, which should be directly related to the improved installation process, adding tools to ensure the overall quality of the assembly personnel.